Does a drain outlet mean a hose is included?
No. A drain outlet identifies a listed drainage feature; it does not establish a supplied hose. A hose, outlet and wheels are separate specification fields. None establishes an emptying time, leak result or permission to move a filled unit. Approve the actual arrangement and matching instructions for the exact model and order version.
Start with the exact drain and wheel listing
The foot bath massager catalog contains several drainage configurations. These three records give a focused comparison for importers and private-label buyers. “Not listed” means the reviewed record leaves a field open; it does not prove that a feature is absent from every current version.
| Model and source | Listed drainage | Wheels | Order confirmation needed |
|---|---|---|---|
| SJ-8805 / P305 Catalog page 15 | Drain hose | Not listed | Actual hose, closure arrangement and supplied-parts list. |
| P1 / P306 Catalog page 16 | Drain outlet; a supplied hose is not established | Listed | Actual outlet arrangement, any proposed accessories and packed configuration. |
| SJ-8802 / P307 Catalog page 17 | Drain hose | Listed | Actual hose, closure arrangement, supplied parts and matching instructions. |
The linked model pages reproduce these catalog entries. SJ-8802 also lists a 4–9 L water-capacity reference; that range is not a measured drainage result. P1 is the model name and P306 its catalog ID. Keep both in correspondence so that a parts question stays attached to the correct product.
Turn “hose included” into a purchasing requirement
Consider a hypothetical distributor brief: “The retail box must contain the approved drain hose, with matching product instructions.” This describes a buyer requirement, not confirmed contents for any current order.
SJ-8805 and SJ-8802 are documented starting points because their records explicitly list a drain hose. Ask the supplier to identify the current hose arrangement and show how it is represented in the supplied-parts list. A hose may be attached or separately packed; the catalog does not settle that detail.
Keep P1 pending against the same requirement. Its drain-outlet entry does not justify silently substituting an outlet-only set, and it does not confirm an optional hose is available. Request a written response identifying the proposed configuration. If it cannot meet the brief, either select another supported candidate or revise the brief explicitly.
Use one parts and approval record per candidate
Leave unknown entries open. The following worksheet supplies no assumed hose dimensions, part quantities, closure design or performance thresholds. Record each loose item separately once the supplier identifies it.
| Field | Information to record | Candidate entry |
|---|---|---|
| Product identity | Model, catalog ID, sample ID, revision and selected electrical version. | To confirm |
| Drain arrangement | Supplier description, part references and photographs tied to this sample. | To confirm |
| Supplied items | Each included part and quantity; whether attached, removable or separately packed. | To confirm |
| Closure parts | Identify any closure components present and their applicable instruction reference. | To confirm |
| Instructions | Current model-matched manual revision and permitted draining and movement guidance. | To confirm |
| Review record | Agreed method, conditions, reviewer, date, observed result and evidence reference. | To confirm |
| Approval status | Accepted configuration, open issues, review owner and approved packaging wording. | To confirm |
Agree what the sample demonstration will establish
Ask the supplier to demonstrate the selected drainage arrangement within its current instructions. Agree the review method and acceptance criteria beforehand. Record what was actually observed, including any issue with the supplied parts or instruction clarity, rather than writing “drainage approved” without a defined scope.
If emptying time, residual water or leakage matters to the buying brief, request an appropriate model-specific evaluation and documented conditions. This article sets no universal limit for any of those measures. A result belongs to the reviewed sample and method; it should not become a range-wide promise.
Wheels and carry handles do not establish safe movement while filled. Request the selected model's guidance rather than deriving a procedure from its appearance. Drainage approval also does not establish electrical compliance or therapeutic benefits; certification documents depend on the product model and target market.
Make the packed set match the approved record
Check that the retail contents list, accessory illustrations and manual refer to the accepted arrangement. A loose part shown in a demonstration should not become a “supplied” claim unless the order specification includes it. Identify any substitution or revision before reusing earlier artwork.
P1 retains a packing question: its listed product dimensions are 39.5 × 32.5 × 37 cm, while the carton is 43.3 × 36.2 × 34 cm. The listed product height exceeds the carton height, but orientation and packed configuration are unresolved. This proves neither a fit failure nor required disassembly. Confirm the actual packed set using the carton data and freight quotation guide.
SJ-8805 has a separate lighting uncertainty: the source language versions disagree, so infrared functionality is not asserted. Keep that unresolved field visible when approving overall packaging claims. Use the golden-sample approval and retention guide to retain the accepted sample, parts list, manual and approval revision together.
Buyer questions
Can we advertise that a hose drains the basin completely?
The listed hose feature does not establish complete emptying or a measured residual volume. Any performance wording needs evidence for the selected configuration and relevant conditions before approval.
Can the same hose be ordered for all three models?
No shared part or interchangeability is established by these records. Ask for the exact part identity and model-specific confirmation; do not infer compatibility from a similar appearance.
Does one piece per carton mean one-piece orders are available?
No. Carton quantities describe packing. Yaoyuan Electric offers factory-direct wholesale supply with MOQ starting from 1000 PCS; retail and one-piece orders are not accepted.
Send a clear drainage brief with your private RFQ
Include the model, quantity, country, plug type, voltage, packing request, OEM request and destination port. Add the required drain arrangement and open accessory questions so the quotation addresses the complete proposed set.